1. Remove the needle plate and fix the two ends at a he […]
1. Remove the needle plate and fix the two ends at a height of 20CM - 30CM (needle tip down)
2. Using pliers, clamp the end of the needle and rotate it to the left and right. When the needle is loose, pull it upwards. (The needle hole of a general needle plate is relatively large, so it can be easily removed)
Note: When pulling the needle, the two ends must be fixed and cannot be shaken. Prevent the needle plate from falling.
Kebei industrial zone, Keiqiao District, Shaoxing city, Zhejiang province, China